English
Before requesting service
If it appears that the
this checklist. It may be that something has been overlooked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).
Symptom | Remedy |
No power | Check if both plugs of the mains cord are properly connected. |
| Check if there is power at the AC outlet by plugging in another appliance. |
No picture | Check if the TV is switched on. |
| Check the video connection. |
Distorted picture | Check the disc for fingerprints and clean with a soft cloth, wiping from |
| centre to edge. |
| Sometimes a small amount of picture distortion may appear .This is not |
| a malfunction. |
Completely distorted picture with player menu While the NTSC/PAL switch is in the wrong status, you should press the STOP and NEXT buttons simultaneously and keep them pressed while
| you plug in the player |
No colour in picture with player menu | While the NTSC/PAL switch is in the wrong status, you should press the |
| STOP and NEXT buttons simultaneously and keep them pressed while |
| you plug in the player |
Disc can’t be played | Ensure the disc label is upwards. |
| Clean the disc. |
| Check if the disc is defective by trying another disc. |
No sound | Check audio connections. |
| If using a HiFi amplifier, try another sound source. |
Distorted sound from HiFi amplifier | Check to make sure that no audio connections are made to amplifier |
| phono input. |
No return to |
|
disc is removed | Reset by switching the player off, then on again. |
| Check to see if the program requires another disc to be loaded. |
The player does not respond to |
|
the remote control | Aim the remote control directly at the sensor on the front of the player |
| Avoid all obstacles which may interfere with the signal path. |
| Inspect or replace the batteries. |
Distorted or B/W picture with DVD or |
|
Video CD disc | The disc format is not according to the |
No audio at digital output | Check the digital connections |
| Check the settings menu to make sure that the digital output is set to on. |
| Check if the audio format of the selected audio language matches your |
| receiver capabilities. |
Buttons do not work | Set the player in standby by using the STANDBY button on the front |
| of the player. Press standby again to set the player back to ON. |
Player does not respond to all operating |
|
commands during playback | Operations are not permitted by the disc. Refer to the instructions in |
| the disc inlay. |
