Philips DVD755/05 manual Preparation, General notes, Connect to a TV, Video Y/C connection

English

Preparation

General notes

-Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player.These are shown in the following drawing.

Please refer to your TV,VCR, Stereo System and any other User Manual(s) as necessary to make the optimal connections.

-Do not connect your DVD-player via your VCR, because the video quality could be distorted by the copy protected system.

-For better sound reproduction you can connect the player audio outputs to your amplifier, receiver, stereo system or A/V equipment. For this see ‘Connecting to audio equipment’ and ‘Multi-Channel sound connections ’ on the next page.

Caution: Do not connect the player’s audio output to the phono input of your audio system.

TV

Connect to a TV

●Connect the Euroconnector to the corresponding connector on the TV using the Euroconnector cable supplied (1).

If your TV is not equipped with a Euroconnector you can select one of the following alternative connections:

S-Video (Y/C) connection

1 Connect the S-Video socket to the corresponding socket on the TV

1

using an optional S-Video cable (2).

DIGITAL AUDIO OUT		STEREO OUT		VIDEO OUT
PCM/MPEG2/AC3/DTS
OPT OUT	DIG OUT	R	L	(CVBS)	(Y/C)
			AUDIO	VIDEO OUT	S-VIDEO OUT

I

AUX-I/O

II

TO TV-I/O

2 Connect the audio Left and Right output sockets to the corresponding sockets on the TV using the audio cable supplied (4).

Video CVBS connection

1Connect the Video socket to the corresponding socket on the TV using the video cable supplied (3).

2 Connect the audio Left and Right output sockets to the corresponding sockets on the TV using the audio cable supplied (4).

14 PREPARATION