12 Hookups (cont’d)
Connecting to a TV and a
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Stereo
(example only)
2 | Back of TV |
(example only) |
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
1
SURROUND CENTER FRONT
DIGITAL AUDIO OUT
PCM/MPEG2/
Dolby
L
L
R
R
COAXIAL OPTICAL
SURROUND | FRONT |
MULTICHANNEL OUT
| 1 |
|
|
| 2 |
|
|
AUDIO CVBS | Pr/Cr Pb/Cb | Y | |
OUT | VIDEO OUT |
|
|
1 Connect the supplied yellow video cable to the Player’s yel- low CVBS (VIDEO OUT) jack and to the corresponding VIDEO IN jack on your TV. There are two CVBS (VIDEO OUT) jacks in case you want to connect the Player to two separate TVs. For simply connecting the Player to a single TV, you may use either of the jacks, but you will not have to use both.
2 Connect the supplied red and white audio cables to the Player’s FRONT (right and left) MULTICHANNEL AUDIO OUT jacks and to the right/left AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors. Using the FRONT jacks will provide the best sound quality when playing Audio CDs and SACDs.
3
4 Turn on the TV and set it to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc. These channels often are near channel 00. See your TV owner’s manual for details. Or, change channels at the TV until you see the Player’s blue screen saver on the TV screen.
5 Turn on the Stereo and set it to the correct Audio In chan- nel or sound source. Refer to the Stereo owner’s manual.
Helpful Hints
•Set Analog output accordingly. Details are on page 40.
•You may use
