Philips DVD763SA owner manual Connecting to a TV Only TV has an S-Video In Jack

Connect an S-Video cable (not supplied) to the Player’s S- VIDEO (VIDEO OUT) jack and to the TV’s S-VIDEO IN jack.

10 Hookups (cont’d)

Connecting to a TV Only

TV has an S-Video In Jack

Back of TV

2	(example only)
	RIGHT AUDIO IN
	LEFT AUDIO IN
	S-VIDEO IN

1

DIGITAL AUDIO OUT

PCM/MPEG2/

Dolby Digital-DTS

COAXIAL OPTICAL

SURROUND CENTER	FRONT
L		L	1
R		R	2
SURROUND SUB WF	FRONT	AUDIO	CVBS Pr/Cr Pb/Cb	Y	S-VIDEO
MULTICHANNEL AUDIO OUT		OUT	VIDEO OUT

1

2 Connect the supplied red and white audio cables to the Player’s red and white (right and left) AUDIO OUT jacks and to the right/left AUDIO IN jacks on the TV. Match the cable colors to the jack colors.

3 Connect the power cords of the Player and the TV to a power outlet.

Press STANDBY-ON on the Player to turn on the Player. The red Standby light will disappear.

4 Turn on the TV power and set the TV to the correct S- Video In channel. This channel might be near channel 00. See your TV owner’s manual for details. Or, change channels at the TV until you see the Player’s blue screen saver on the TV screen.

Helpful Hint

•On the TV, the S-Video In jack may be labeled Y/C, S-Video, or S-VHS (Super Video).