Wolf ICBDD30 installation instructions Wiring connections

Models: ICBDD30

1 74
Download 74 pages 11.89 Kb
Page 16
Image 16

WOLF D OW N D R A F T VENTILATION SYSTEMS

I N T E R NA L B LOW E R WIRING

R E M OT E B LOW E R WIRING

ICBDD30I, ICBDD36I AND ICBDD45I

ICBDD30R, ICBDD36R AND ICBDD45R

Mount a standard 220-240 V AC electrical box, with 3-pronged grounded receptacle, inside the cabinet or adjacent cabinet. Make sure it is located within the reach of the downdraft’s 2.5 m power cord.

Run the appropriate power cable into the cabinet and connect it to electrical box and outlet.

Plug the power cord of the downdraft into the outlet.

Mount a standard 220-240 V AC electrical box, with 3-pronged grounded receptacle, inside the cabinet or adjacent cabinet. Make sure it is located within the reach of the downdraft’s 2.5 m power cord.

Run the appropriate power cable into the cabinet and connect it to electrical box and outlet.

The remote blower may not exceed a 3.0 amp rating.

Run 2-wire plus ground power cable from the remote blower to the electrical box on the remote blower adapter plate.

Connect the downdraft wiring to the power cable from the remote blower. Wire brown to brown, blue to blue and green/yellow to green/yellow. Refer to the illustration below.

Replace the electrical box cover.

Plug the power cord of the downdraft into the outlet.

IMPORTANT NOTE: For mounting and installation of the remote blower, refer to the installation instructions for your specific blower.

brown to brown

220-240 V AC

line in green/yellow to green/yellow

blue to blue

Wiring connections

16

Page 16
Image 16
Wolf ICBDD30 installation instructions Wiring connections