Wolf ICBDD30 S Ta L L At I O N I N S T Ru C T I O N S, Models ICBDD45I and ICBDD45R

Models: ICBDD30

1 74
Download 74 pages 11.89 Kb
Page 7
Image 7

I N S TA L L AT I O N I N S T RU C T I O N S

O V E R A L L D I M E N S I O N S

MODELS ICBDD45I AND ICBDD45R

Overall Width

1156 mm

Width of Chimney

1048 mm

 

 

Overall Height (above countertop)

230 mm

 

 

Overall Depth

60 mm

 

 

Depth of Chimney

38 mm

 

 

Dimensions may vary to +3 mm.

E L E C T R I C A L R E Q U I R E M E N T S

Wolf downdraft ventilation systems require a separate, 240 V 50/60 Hz power supply. The service should have its own 10A circuit breaker. The unit is supplied with a 2.5 m CEE 7/7 “Schuko” style Continental European power cord. The specific location of the outlet is not critical, as long as it is within reach of the power cord that is located mid-way, top and bottom, on the right side of the downdraft.

IMPORTANT NOTE: If Model ICBDD30 is to be installed in a 762 mm wide cabinet, Model ICBDD36 in a 914 mm wide cabinet or Model ICBDD45 in a 1156 mm wide cabinet, the electrical outlet cannot be located on the back wall of the cabinet. The outlet can be placed in an adjacent cabinet within reach of the power cord. An access hole for the power cord must be drilled in the cabinet wall.

Choose the electrical location shown in the illustration below that best suits your installation.

IMPORTANT NOTE

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

230 mm

1156 mm

1048 mm

38 mm

DEPTH OF

DOWNDRAFT CHIMNEY

60 mm

 

E

762 mm min

OPTIONAL

ELECTRICAL

FOR MODEL ICBDD30

LOCATION IN

914 mm min

ADJACENT RIGHT

FOR MODEL ICBDD36

SIDE CABINET

 

1156 mm min

 

FOR MODEL ICBDD45

 

Models ICBDD45I and ICBDD45R

Location of electrical

7

Page 7
Image 7
Wolf ICBDD30 installation instructions S Ta L L At I O N I N S T Ru C T I O N S, Models ICBDD45I and ICBDD45R