![](/images/new-backgrounds/1061149/6114915x1.webp)
WOLF D OW N D R A F T VENTILATION SYSTEMS
I N S TA L L AT I O N S P E C I F I C AT I O N S |
| |
Wolf downdraft Model ICBDD30 will fit most | IMPORTANT NOTE: To install a downdraft | |
762 mm wide cabinets, Model ICBDD36 will fit | system and a Wolf cooktop, you must allow for | |
most 914 mm wide cabinets and Model | a minimum 638 mm flat counter space from | |
ICBDD45 will fit most 1156 mm wide cabinets. | front to back. A countertop with a raised lip or | |
It is recommended that oversized cabinets be | backsplash may not allow enough space for | |
used for easier installation. Cabinet backs may | proper installation. 60 mm of flat countertop is | |
need to be removed. | required behind the cooktop and 44 mm is | |
Wolf downdraft ventilation systems can be | necessary between the back edge of the | |
cooktop and inside of cabinet back. | ||
mounted in an island, peninsula or standard | ||
| ||
wall location. | If downdraft Model ICBDD30 is installed in | |
The illustration below provides installation | combination with with two cooktops or inte- | |
grated modules, an integrated module support | ||
dimensions for all Wolf downdraft models. | ||
(8603386) for downdraft ventilation is required. | ||
Pay careful attention to the areas of potential | ||
The integrated module support is not required | ||
interference as noted in the illustration. | ||
for Model ICBDD45. | ||
|
638 mm min
44 mm min |
| OF FLAT COUNTERTOP* |
|
BACK EDGE |
|
|
|
OF COOKTOP | 16 mm |
| |
TO INSIDE OF |
| ||
CABINET BACK* |
| 489 mm |
|
|
| COOKTOP | |
8.7 mm |
| DEPTH |
|
|
|
| |
| 60 mm |
| |
| 54 mm | 197 mm | |
|
| 83 mm |
|
745 mm |
|
|
|
COUNTERTOP |
|
|
|
TO BOTTOM OF |
| 92 |
|
AIR BOX |
|
| |
| mm |
| |
|
|
| |
| 127 | 457 |
|
| mm | mm |
|
| 181 mm |
|
|
64 mm min
WITH NO
RAISED LIP*
914 mm
610 mm min
CABINET DEPTH
*AREAS OF POTENTIAL INTERFERENCE
Downdraft installation dimensions
8