Preparation
–TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and AUTO mode depending on your TV.
The conversions supported are as follows:
|
|
|
|
|
|
|
|
|
| Disc | Output format |
| |||
| Type |
| Format | Selected mode |
| ||
|
|
|
| NTSC | PAL | AUTO |
|
| DVD |
| NTSC | NTSC | PAL | NTSC |
|
|
|
|
|
|
|
|
|
|
|
| PAL | Not | PAL | PAL |
|
|
|
| Supported |
| |||
|
|
|
|
|
|
| |
| VCD |
| NTSC | NTSC | PAL | NTSC |
|
|
|
|
|
|
|
|
|
|
|
| PAL | NTSC | PAL | PAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1In the Personal Preferences Menu, select TV System.
2Press 3 or 4 to select PAL, NTSC or AUTO.
Notes:
–AUTO can only be selected when using a TV that has both the NTSC and PAL systems.
–This is applicable for CVBS output on cinch and SCART only.
–Slight picture distortions may occur due to this conversion.This is normal.Thus, the AUTO format is most suitable for the best picture quality.
Sound
–Analogue output
Select Stereo, Dolby
–Night Mode
When set to ON, the dynamics of your sound output are optimised. High volume outputs are softened, enabling you to watch your favourite action movie without disturbing others.
–Karaoke vocal
Put this setting to ON only when a
E n g l i s h
– Digital output
¶Digital output selection enables you to specify the type of digital output which is suitable to your receiver.
¶Select ALL (default setting), if you had connected your DIGITAL AUDIO OUT to a multichanel decoder receiver.
¶Select PCM only if your receiver is not capable of decoding multichannel audio.
¶Select OFF to deactivate the DIGITAL AUDIO OUT.
13
