Introduction

E n g l i s h

Philips DVD Video

Introduction

Your Philips DVD Video player will play digital video discs conforming to the universal DVD Video standard. The unique features on DVD Video, such as selection of sound track, subtitle languages and different camera angles (again depending on the disc), are all supported.

In addition to DVD Video discs, you will be able to play all Video CDs and Audio CDs.

DVD Video

You will recognize DVD Video discs by the logo shown. Depending on the material on the disc (a movie, video clips, a drama series, etc.) the disc may have one or more Titles.

 

DVD-VIDEO DISC

 

TITLE 1

 

TITLE 2

 

CHAPTER 1

CHAPTER 2

CHAPTER 1

CHAPTER 2

CHAPTER 3

Video CD

You will recognize Video CDs by the logo shown.

Remote Control Battery

Installation

Insert batteries as indicated inside the battery compartment.

Caution: Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

-

+

+

-

Environmental Information

Your system consists of materials that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Super Video CD (SVCD)

SVCDs are based on the Super VCD IO Standard, referring to the Standard of Electronics Industry of the People’s Republic of China.

Audio CD

Audio CDs contain music tracks only. You will recognize Audio CDs by the logo shown.

MP3 (MPEG Audio Layer 3)

This player supports the MP3 format which contains compressed music tracks.

Note:

– Only the first session of multisession discs is supported.

Unpacking

First check and identify the contents of your DVD Video player package.

You should have the following items.

DVD Video player

AC power cord

Remote Control with batteries

Audio cable

CVBS Video cable

SCART cable

Instructions for use

If any item is damaged or missing, contact your retailer or Philips.

Keep the packaging material for future transportation.

Safety Information

Do not expose the system to excessive moisture, rain, sand, or heat sources.

Place the player on a firm, flat surface.

Keep the player away from domestic heating equipment and direct sunlight.

In a cabinet, allow about 2.5 cm (1 inch) of free space all around the player for adequate ventilation.

If the DVD Video player cannot read CDs/DVDs correctly, use a commonly available cleaning CD/DVD to clean the lens before taking the DVD Video player to be repaired. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens.

The lens may cloud over when the DVD Video player is suddenly moved from cold to warm surroundings. Playing a CD/DVD is not possible then. Leave the power on for about one hour with no disc in the unit until normal playback is possible.

Cleaning Discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out, in a straight line.

Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for analog discs.

6INTRODUCTION

Page 6
Image 6
Philips DVDQ40/022 owner manual Introduction