64
English
3139 246 14134
Display panel symbols/messagesThe following symbols/messages may
appear on your DVD recorder display:
●00:00
Multifunction display/text line
–Title/track number
–Total/elapsed/remaining title/track time
–Disc/title name
–Error or warning messages
–Additional information regarding the disc
–TV channel number or source of video
–Clock (This is displayed in Standby mode).
–TV programme title
●||||||||||||||||||||||||||||||
–Disc bar: Displays the current position on
the disc.
–Play/Record: The single flashing segment
represents the current position of the disc
pointer.
–Pause: Indicated by the flashing segment on
both sides of the current position.
–Stop: Indicated by the flashing segment at
the current position.
●¡
Tuner is selected as visible source.
●
Disc is the current active source.
●TV
Modulator is turned off. The antenna signal (RF
signal) is only connected to the TV when the
modulator is turned off.
●D
Remote control command for the DVD
recorder has been received.
●X TIMER
A timer recording has been programmed or is
active.
●!SAT
The DVD recorder is prepared for satellite
recording.
●BLOCKED
The disc tray cannot be opened or closed due
to some mechanical obstruction.
●COMPATIBLE
The DVD Recorder is busy making changes to
make the disc DVD-compatible.
●CLOSING
Disc tray is closing.
●COPY PROT
The DVD/video cassette you are trying to
copy is copy-protected.
●DISC ERR
An error occurred when writing the title. If
this happens often, please clean the disc or use
a new one.
●DISC FULL
Disc is full. There is no room for new
recordings.
●DISC UPDATE
–Updating of disc is done after the editing is
complete.
–Entire disc is being erased.
●DISC WARN
An error occurred when writing the title. The
recording will continue, but the error will be
skipped.
●EMPTY DISC
Inserted disc is new or has been completely
erased (no recordings present).
●FINALISE
The DVD+R disc is being finalised. The
progress bar on the LED shows the status of
the finalisation process.
●EMPTY TITLE
An empty title was selected.
●INFO DVD
Information on the inserted DVD is displayed
on the screen.
●CREATE MENU
After the first recording has been successfully
complete on a new disc, the menu structure is
created.
1DVDR6xx_Eng05_14134c 9/28/04, 11:21 AM64