Philips DVDR990 manual Connecting to other equipment, Connections frontside of your DVD recorder

English
	Connecting to other equipment
	Use the top SCART connector (EXT 2) on your DVD
	recorder to make connections to a:
	- Satellite receiver or Set top box,
	- VCR,
	- DVD-Video player
	Most pre-recorded video cassettes and DVD discs are
	copy protected. If you try to copy them the display
	shows ‘COPY PROTECT’.
	For installation of a decoder, see ‘User Preferences’ -
	‘Installation’.

Notes:

-If the power is off or Low Power Standby is selected (see User Preferences - features), the signal from EXT 2 will not be passed on to the TV set on EXT 1.

-EasyLink functionality will not be available to devices connected via the DVD recorder’s EXT 2 SCART connector.

Connections - frontside of your DVD recorder

Camcorder connection

•If you have a DV or Digital 8 camcorder, connect the i-link DV input socket (1) to the corresponding output socket on the camcorder using the i-link cable of your camcorder.

•If you have a Hi-8 or S-VHS(C) camcorder, connect the S-video input socket to the corresponding output socket on the camcorder, using the S-video cable supplied (2) and connect the audio cable (4) supplied.

•Otherwise connect the Video input socket (yellow) to the corresponding output socket on the camcorder using the video cable supplied (3) and connect the audio Left (white) and Right (red) input sockets to the corresponding sockets on the camcorder using the audio cable supplied (4).

•If your camcorder has mono sound, use only the left audio connector. In this case the sound will be recorded on both audio channels.

10INSTALLATION