Philips DVDR 70/021, DVDR 70/001 manual Connect camcorder to the front sockets

Models: DVDR 70/021 DVDR 70/001

1 88
Download 88 pages 20.36 Kb
Page 25
Image 25

Connect camcorder to the front sockets

To copy camcorder recordings, you can use the front sockets. These sockets are located behind the flap on the left hand side.

Very good picture quality

If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEOinput of the DVD recorder to the appropriate S-VHS output on the camcorder.

You must also connect the audio input left AUDIO right on the DVD recorder to the audio output on the camcorder.

ENGLISH

Good picture quality

If you have a camcorder that only has a single video output (Composite Video, CVBS), connect the VIDEO input on the DVD recorder to the appropriate output on the camcorder.

You must also connect the audio input left AUDIO right on the DVD recorder to the audio output on the camcorder.

Connecting audio devices to the analogue audio sockets

Two audio output sockets OUT L AUDIO R are located on the back of the DVD recorder (audio signal output left/right)

These can be used to connect the following:

•) a receiver with Dolby Surround Pro Logic •) a receiver with two analogue stereo

Can I use the 'Phono' input on my amplifier?

 

This socket (input) on the amplifier is designed only for record players

 

without preamplifiers. Do not use this input for connecting the DVD

 

recorder.

?

The DVD recorder or the amplifier may be damaged as a result.

Connecting additional devices

19

 

Page 25
Image 25
Philips DVDR 70/021 manual Connect camcorder to the front sockets, Connecting audio devices to the analogue audio sockets