English
Setup Menu Options (continued)
Audio Menu (underlined options are the factory default settings)
Digital Output | This setting is only required if the COAXIAL/DIGITAL OUT | |
| socket of this unit is connected to other audio/video device. | |
| { Off } | – Deactivate the digital audio output. For |
|
| example, if you use the AUDIO OUT |
|
| sockets to connect this unit to a TV or |
|
| Stereo system. |
| { PCM } | – The connected device does not support |
|
| |
|
| converts |
|
| Code Modulation) format. |
| { ALL } | – The connected device supports multi- |
|
| channel audio formats. The digital audio |
|
| format will be output as on disc. |
| Note: If the { Digital Output } is set to { All } during MPEG, MP3 | |
| or WMA playback, the audio output will be in PCM format. | |
| This mode optimizes playback of sound at low volume. High | |
Night Mode | ||
| volume outputs will be softened and low volume outputs will be | |
| enhanced to an audible level. This feature is only applicable for | |
| DVD video discs with Dolby Digital mode. | |
| { Off } | – Turn off night mode. Select this to enjoy |
|
| the surround sound with its full dynamic |
|
| range. |
| { On } | – Turn on night mode. |
Down Sampling This feature enables you to disable digital signal processing for better sound quality.
{ Off } | – | Play disc recorded at sampling rate of |
|
| 96kHz. This rate can only be achieved in |
|
| |
{ On } | – | Play disc recorded at sampling rate of |
|
| 48kHz. |
32
