1Press SETUP.
» [General Setup] menu is displayed.
2Press .
3Select an option, then press OK.
4Select a setting, then press OK.
•To return to the previous menu, press .
•To exit the menu, press SETUP.
[Disc Lock]
Set play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked).
•[Lock] - Restrict access to the current disc. The next time you want to play this disc or unlock it, you need to enter the password.
•[Unlock] - Play all discs.
Tip
•You can set or change the password, go to [Preferences] > [Password].
[OSD language]
Select an
[Sleep Timer]
Switch automatically to standby at the preset time.
•[Off] - Disable sleep mode.
•[15 mins], [30 mins], [45 mins], [60 mins]
[Auto standby]
Turn on or off automatically standby.
•[On] - Switch to standby 15 minutes of inactivity (for example, in pause or stop mode).
•[Off] - Disable the auto standby mode.
Audio setup
1Press SETUP.
» [General Setup] menu is displayed.
2Press to select [Audio Setup], then press .
3Select an option, then press OK.
4Select a setting, then press OK.
•To return to the previous menu, press .
•To exit the menu, press SETUP.
[Analogue Output]
Select an analogue setting based on the audio device that is connected through the analogue audio jack.
•[Stereo] - For stereo output.
•[LT/RT] - For surround sound output through two speakers.
[Digital Audio]
Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).
•[Digital Output] - Select a type of digital output.
•[Off] - Disable digital output.
•[All] - Support
•[PCM Only] - Downmix to
•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
•[48kHz] - For discs recorded at sampling rate of 48 kHz.
•[96kHz] - For discs recorded at sampling rate of 96 kHz.
Note
•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].
•The higher the sampling rate, the better the sound quality.
[Volume]
Set the default volume level when you play a disc.
1.Press OK.
2.Press to set the volume.
3.Press OK to confi rm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio output.
•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.
•[Movie Mode] - Select a sound effect for movies.
•[Music Mode] - Select a sound effect for music.
12EN