[OSD Language]

Select an on-screen menu language. [Sleep Timer]

Switch automatically to standby at the preset time.

[Off] - Disable sleep mode.

[15 mins], [30 mins], [45 mins], [60 mins] -Select the count down time for this product to switch to standby.

[Auto Standby]

Turn on or off automatically standby.

[On] - Switch to standby 15 minutes of inactivity (for example, in pause or stop mode).

[Off] - Disable the auto standby mode. [DivX(R) VOD Code]

Display the DivX® registration code.

Tip

Use this player’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Audio setup

1Press SETUP.

» [General Setup] menu is displayed.

2Press to select [Audio Setup], then press .

3Select an option, then press OK.

4Select a setting, then press OK.

To return to the previous menu, press .

To exit the menu, press SETUP. [Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

[Stereo] - For stereo output.

[LT/RT] - For surround sound output through two speakers.

[Digital Audio]

Select a digital setting based on the digital amplifier/ receiver that is connected through the digital jack (coaxial/digital).

[Digital Output] - Select a type of digital output.

[Off] - Disable digital output.

[All] - Support multi-channel audio formats.

[PCM Only] - Downmix to two-channel audio format.

[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

[48kHz] - For discs recorded at sampling rate of 48 kHz.

[96kHz] - For discs recorded at sampling rate of 96 kHz.

Note

[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

The higher the sampling rate, the better the sound quality.

[Volume]

Set the default volume level when you play a disc.

1.Press OK.

2.Press to set the volume.

3.Press OK to confirm and exit.

[Sound Mode]

Select a preset sound effect to enhance the audio output.

[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

[Movie Mode] - Select a sound effect for movies.

[Music Mode] - Select a sound effect for

music.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

[On] – Enjoy quiet viewing at night.

[Off] – Enjoy surround sound with a full dynamic range.

Note

Applicable only to Dolby Digital encoded DVD.

English

EN 13

Page 13
Image 13
Philips DVP3111 user manual Audio setup