Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
Select menu display language
1Press SETUP.
» [General Setup] menu is displayed.
2Select [OSD Language], then press
.
General Setup
Note
•The type plate is located on the back of the product.
1 Connect the AC power cable to the wall
socket.
» The player is ready to be set up for use.
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
English |
Melayu |
4 Get started
Prepare the remote control
1Open the battery compartment.
2Insert two R03 or AAA batteries with correct polarity
3Close the battery compartment.
Caution
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Find the correct viewing channel
1Press 
to turn on this product.
2Turn on the TV and switch to the correct
•The language options may vary from different regions.
3Press 
to select a language, then press OK.
Turn on progressive scan
Note
•To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 1: Connect to the component video jacks” for details).
Video Setup
| TV System |
|
|
|
|
|
|
|
|
|
| On |
| ||
| TV Display |
|
|
| Off |
| |
| Progressive |
|
|
|
|
|
|
| Picture Setting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Turn on the TV to the correct viewing channel for this product.
2Press SETUP.
3Press 
to select [Video Setup].
4Select [Progressive] > [On], then press OK. » A warning message is displayed.
5To proceed, select [Ok] and press OK. » The progressive setup is complete.
8EN
