English
EN 11
Connect
Route audio to other devices
Route the sound from this DVD player to other
devices to enhance audio play.

Connect to digital ampli er/receiver

DIGITAL IN
COAXIAL
DIGITAL
OUT
1 Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT jack on this
DVD player and the COAXIAL/DIGITAL
input jack on the device.
Tip
You can optimize the au dio output (see ch apter •
‘Adjust setti ngs’ - [ Audio Setup ] > [ Dig ital Audio
]) for details.

Connect to analog stereo system

AUDIO IN
1 Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
Tip
You can optimize the au dio output (see ch apter •
‘Adjust setti ngs’ - [ Audio Setup ] > [ An alog Output
]) for details.
Connect USB device
1 Connect the USB  ash drive to the
(USB) jack on this DVD player.
Note
This DVD player ca n only play/view MP 3, WMA, •
DivX or JPEG  les that are stored o n such devices.
Press
• to access the conte nt and play the  les.
Connect to power outlet
Warning
Risk of produc t damage! Ensu re that the power •
supply volta ge correspond s to the voltage pr inted on
the back or the und erside of the DV D player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.