15
Audio
Analog stereo output•
Signal to noise ratio (1 kH z): > 90 dB •
(A-weighted)
Dynamic Range (1 kHz): > 80 d B (A-weighted)•
Crosstalk (1 kHz): > 80 dB•
Distortion/no ise: (1 kHz): > 70 dB•
MPEG MP3: MPEG Audio L3•
Main unit
Dimensions (w x h x d): 360 x 37 x 210 (mm)•
Net Weight: 1.45 kg•
Power
Power supply rating: 110 - 240V, 50/60 HZ•
Power consumption: < 10 W•
Power consumption in sta ndby mode: < 1 W•
Accessories supplied
Remote control and bat teries•
Audio/Video cables•
User Manual•
Laser specification
Type: Semiconductor laser InGaAIP (DVD), •
AIGaAs (CD)
Wave length: 655 nm (DVD), 790 nm (CD)•
Output Power: 7.0 mW (DVD), 10.0 mW •
(VCD/CD)
Beam divergence: 60 d egrees•
8 Troubleshooting
Warning
Risk of electric sh ock. Never re move the casing o f the •
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of your product. The model
number and serial number are on the back of your
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Main unit

The buttons on this unit do not work.
Disconnect this product from the power •
outlet for a few minutes, then connect again.
7 Additional information

Update software

For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
Power supply must not be i nterrupte d during soft ware •
upgrade.
1 Press SETUP.
2 Select [Preferences] > [Version Info], and
then press OK.
3 Write down the file name , and then press
SETUP to exit the menu.
4 Visit www.phili ps.com/suppor t to check for
the latest softw are version, usi ng the file name
for this product.
5 Refer to the upgrade ins tructions on t he
website for more infor mation.
Note
Disconnect the powe r cord for a few second s and •
connect again to tur n on the produc t.

Care

Caution
Never use solvents su ch as benzene, t hinner, cleane rs •
available commerci ally, or anti-s tatic spray s intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.

Specifications

Note
Specification and d esign are subj ect to change wi thout •
notice
Video
Signal system: PAL / NTS C•
Composite video out put: 1 Vpp ~ 75 ohm•
Component video out put: 0.7 Vpp ~ 75 ohm•
English
EN