7
Note
The type plate is loca ted on the back of th e product. •
1 Connect the AC power cab le to the wall
socket.
The product is ready to be set up for use. »
4 Get started
Prepare the remote control
1 Press and push the bat tery compar tment to
slide it open (see “1” in the ill ustration).
2 Insert two AA A batteries wi th correct
polarity (+/-) as indicated.
3 Push and slide back the bat tery compar tment
(see “3” in the illustrat ion).
Note
If you are not going to use th e remote contro l for a long •
time, remove the bat teries.
Do not mix batterie s (old and new or carb on and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1 Press to turn o n this product.
2 Turn on the TV and switch to t he video input
channel (refer to the TV us er manual on how
to select the A/V i nput channel).
Connect multi channel receiver
1 Connect the audio cables (not supplied) to:
the • AUDIO OUT (FRONT L/R , REAR
L/R, CENTER and SUBWOOFER) jacks
on this product.
the audio input jacks o n the device.•
Connect an analogue stereo system
1 Connect the audio cables (supplied) to:
the • AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks o n the TV.•
Connect power
Caution
Risk of product dam age! Ensure th at the power supp ly •
voltage correspo nds to the volta ge printed on th e back
of the product.
Before connectin g the AC power cord, e nsure you have
•
completed all other connections.
FRONT R REAR R SUBWOOFER
FRONT L REAR L CENTER
MULTICHANNEL
AUDIO IN
AUDIO IN
FRONT L
FRONT R
English
EN