Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer, VCR,

 

etc.) before turning on the projector.

2

Connect the projector’s AC power cord into an AC outlet and

 

turn the Main On/Off switch on. The POWER indicator lights

 

red.

3

Press the POWER ON/STAND-BY button on the top control or

 

on the remote control.

 

The POWER indicator turns green and the cooling fans start to

 

operate. As the automatic slide shutter opens, a preparation

 

display appears on the screen and the countdown starts.

4

After the countdown, the input source that was selected the

 

last time appears on the screen.

POWER indicator

POWER

ON/STAND-BY

 

 

button

ON/STAND-BY

NO FREEZE

SHOW

Top Control

Remote Control

Main On/Off switch

Notes:

If the automatic slide shutter does not open properly, the projector will not be turned on and the POWER indicator will blink orange. Press the POWER ON/STAND-BY button again to restart.

When “Countdown off” or “Off” is selected in the Display function, the countdown will not be displayed on the screen (p.38).

During the countdown period, all operations are invalid.

OFFON

Selected Input Source

Automatic Slide Shutter

Use this tab when handling manually.

Do not touch the slide shutter while it is moving, as this could cause injury or the projector to malfunction.

18

Page 18
Image 18
Sanyo PLV-Z60 owner manual Basic Operation, Turning On the Projector, Top Control Remote Control Main On/Off switch