Part Names and Functions

Remote Control Operating Range

Point the remote control toward the projector (Infrared Remote Receiver) when pressing any buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector.

16.4’ (5 m)

60°

Remote control

Remote Control Battery Installation

1

Open the battery

2

Install new batteries

3 Replace the compartment lid.

compartment lid.

into the compartment.

 

Pull up the lid

 

Two AA size batteries

 

 

and open it.

 

For correct polarity (+ and –),

 

 

 

 

be sure battery terminals are

 

 

 

 

in contact with pins in the

 

 

 

 

compartment.

 

*When the batteries of the remote control are replaced, the remote control code automatically returns to the initial code (Code 1) (p.39).

To insure safe operation, please observe the following precautions: ● Use two (2) AA or LR6 type alkaline batteries.

● Always replace batteries in sets.

Do not use a new battery with a used battery.

Avoid contact with water or liquid.

Do not expose the remote control to moisture or heat.

Do not drop the remote control.

If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

12

Page 12
Image 12
Sanyo PLV-Z60 owner manual Remote Control Operating Range, Remote Control Battery Installation