41

Input Source Information Display

The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Video or S-video A color system of the connected video
signal is displayed from among PAL,
SECAM, NTSC, NTSC4.43, PAL-M, and
PAL-N.

Signal

Component

H-sync freq.

V-sync freq.

Lamp Time

Information Menu
A system mode of the connected video
signal is displayed from among 480i, 480p,
575i, 575p, 720p, and 1080i.
HDMI A system mode of the connected video
signal is displayed from among D-VGA, D-
480i, D-480p, D-575i, D-575p, D-720p, D-
1080i, and D-1080p.
PC A resolution of the connected computer
signal is displayed.
No signal When there is no signal input, “- - - -” is
displayed.
Out of recognition
When the connected input source is out of
recognition, “Unknown” is displayed.
The horizontal frequency of the input signal is displayed in KHz, or
“- - - -” when no signal.
The vertical frequency of the input signal is displayed in Hz, or
“- - - -” when no signal.
The cumulative lamp operating time is displayed.
Information
Direct Operation
Press the INFO. button on the remote control to display the
Information Menu.
COMPONENT
VIDEO C1/C2
PC
H1/H2
S-VIDEO
INPUT
CXVT
HDMI
INFO.
INFO. button
Remote Control
Press the Point edbuttons to select the Information Menu. The
Information Menu is displayed.
See below for displayed information.
Menu Operation

Image

Screen

The selected image mode is displayed.
The selected screen size is displayed.

Input

Lamp status

The selected input source is displayed.
The selected lamp mode is displayed.