Part Names and Functions

Rear Terminal

q

w e

r

S-VIDEO

HDMI 1 HDMI 2 COMPUTER

VIDEO

t

y

COMPONENT 1

COMPONENT 2 Y Pb/Cb Pr/Cr

SERVICEPORT

qCOMPUTER

Connect the computer output signal, or RGB Scart 21- pin video output to this connector (p.17).

wS-VIDEO

Connect the S-Video output signal from video equipment to this jack (p.16).

eCOMPONENT 1 or COMPONENT 2

Connect the component video output signal to these jacks (p.16).

rSERVICE PORT

This jack is used to service the projector.

tHDMI 1/HDMI 2*

Connect the HDMI output signal from video equipment to these terminals (p.17).

yVIDEO

Connect the composite video output signal from video equipment to this jack (p.16).

*Note on the HDMI connector:

Use the HDMI connector less than the size shown below. Otherwise you cannot connect use HDMI 1 and HDMI 2 terminals at the same time.

Maximum dimensions of the HDMI connectors

0.94" (24 mm)

0.59" (15 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WIDTHTHICKNESS

9

Page 9
Image 9
Sanyo PLV-Z60 owner manual Rear Terminal