24

Input Source and System Selection

Press the INPUT button on the top control or the INPUT buttons
on the remote control (see below) to choose an input source.
Top Control
INPUT button
Press the VIDEO, S-VIDEO, C1/C2, H1/H2, or PC buttons on the
remote control according to the input source.
COMPONENT
VIDEO C1/C2
PC
H1/H2
S-VIDEO
INPUT
CXVT
HDMI
INFO.
Remote Control

INPUT buttons on the remote control

INPUT buttons
When the video signal is connected to the VIDEO
jack, press VIDEO.
VIDEO
When the video signal is connected to the S-VIDEO
jack, press S-VIDEO.
S-VIDEO
When the video signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, press C1/C2.
Component 1 ➜Component 2 ➜ Component 1 ➜ • • • •
C1/C2
When the video signal is connected to the HDMI
terminal, press H1/H2.
HDMI 1 ➜HDMI 2 ➜ HDMI 1 ➜ • • • •
H1/H2
INPUT button
Video
S-video
PC When the computer signal is connected to the
COMPUTER connector, press PC.
Component 1
Component 2
HDMI 1
HDMI 2
✔Note:
•Before selecting an input source with these buttons, each input must be set on a
proper signal form via menu operation (see on pages 25 – 26).
Input
Computer
✔Note:
•When switching from HDMI1 to HDMI2 or vice versa, the signal may be interrupted
for a moment depending on the equipment.