Image Adjustment
COLOR MANAGEMENT
COLOR MANAGEMENT LIST
Select Color management in the Advanced menu and then press the OK or Point 8 buttons. The COLOR MANAGEMENT LIST appears. You can store up to eight (8) color management data in the list.
In the COLOR MANAGEMENT LIST, the adjusted color data are check marked reflecting the changes in the image. You can choose whether to apply the data in the list to the image.
Clear the check mark if you do not want to apply the data; select the check mark and then press the OK button. The check mark disappears.
If you want to readjust the color, select a color data box in the list and press the OK button. The COLOR SELECTION window appears and you can readjust the color. See below for color selection.
If you want to delete a particular data in the list, select the DEL box and then press the OK button. A confirmation box appears. Select [Yes] and then press the OK button.
Press the OK button when selecting the following items.
ALL DEL . . . . . . Delete all the data in the list. Press the OK button and a confirmation box appears. Select [Yes] and press the OK button.
COLOR M. . . . . Go to COLOR SELECTION.
EXIT . . . . . . . . . Exit the Color management mode and return to the Advanced menu. To store the adjusted data, see “Store” on the next page.
Press the MENU button when you want to return to the Advanced menu.
COLOR SELECTION
Press the OK button when “COLOR M.” in the COLOR MANAGEMENT LIST is selected. The COLOR MANAGEMENT LIST disappears and the Color management pointer appears.
Use the Point ed78 buttons to move the pointer to a spot where you want to adjust the color and then press the OK button. The image freezes and the COLOR SELECTION window appears. (Note that when certain colors are chosen, an exclamation mark is displayed indicating that these colors are not adjustable.)
Use the Point ed buttons to select COLOR LEVEL, COLOR PHASE, or GAMMA and the Point 78buttons to adjust them. While adjusting, the changes are reflected in the image accordingly. If you press the MENU button while operating the color selection, the Color management pointer will be reset.
After adjusting, press the OK button to go to the COLOR MANAGEMENT LIST.
COLOR MANAGEMENT LIST | Color data box |
Clear the check mark if | Select the DEL box if | ||
you do not want to apply | you want to delete | ||
this adjusted color data | the adjusted data. A | ||
to the projected image. | confirmation box | ||
| appears. | ||
|
|
|
|
|
|
|
|
Select [Yes] to delete the selected color data.
COLOR SELECTION
Color management pointer
Use the Point ed78 buttons to move the pointer to a spot where you want to adjust the color and then press the OK button. The COLOR SELECTION window appears.
After adjusting COLOR LEVEL, COLOR PHASE, and GAMMA, press the OK button.
Go to the COLOR MANAGEMENT LIST.
To store the adjusted data, exit the Color management mode and go to “Store” in the Image adj. Menu (see page 32).
31
