Philips DVP3556X/94 user manual Audio setup, 14 EN

[DivX(R) VOD Code]

Display the DivX® registration code and deregistration code.

•[Registration] - Obtain a registration code to register this product on website.

•[Deregistration] - Obtain a deregistration code to cancel the registration of this product on website.

Note

•Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Audio setup

1Press SETUP.

» [General Setup] menu is displayed.

2Press to select [Audio Setup], and then press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press BACK .

•To exit the menu, press SETUP. [Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

• [LT/RT] - For the surround sound output through two speakers.

• [Stereo] - For the stereo output.

• [Multi Channel] - For multi-channel output. [Digital Audio]

Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).

• [Digital Output] - Select a type of digital output.

•[All] - Support multi-channel audio formats.

•[Off] - Disable digital output.

•[PCM Only] - Downmix to two-channel audio format.

•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

•[48kHZ] - For discs recorded at sampling rate of 48 kHz.

•[96kHZ] - For discs recorded at sampling rate of 96 kHz.

Note

•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

•The higher the sampling rate, the better the sound quality.

[Volume]

Set the default volume level when you play a disc.

1.Press OK.

2.Press to set the volume.

3.Press OK to confi rm and exit.

[Sound Mode]

Select a preset sound effect to enhance the audio output.

•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

•[Movie Mode] - Select a sound effect for movies.

•[Music Mode] - Select a sound effect for music.

[Speaker Setup]

Optimize the surround output for the connected speakers.

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

•[Off] - Turn off CD-upsampling.

•[88.2kHz] - Convert to twice the original sampling rate.

•[176.4kHz] - Convert to four times the original

sampling rate.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

•[On] - Enjoy quiet viewing at night.

•[Off] - Enjoy surround sound with a full dynamic range.

Note

•Applicable only to Dolby Digital encoded DVDs.

14EN