Connect analogue stereo system
AUDIO IN
1Connect the audio cables (supplied) to:
•the AUDIO OUT L/R jacks on this product.
•the audio input jacks on the device.
Connect USB flash drive
DVD PLAYER DVP3560K
1Connect a USB flash drive to the 
jack on this product.
Note
•This product can only play/view MP3, WMA, DivX (Ultra) or JPEG files that are stored on a USB flash drive.
•Press the 
button to access the content and play the files.
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
•Before connecting the AC power cord, ensure you have completed all other connections.
Note
•The type plate is located on the back of the product.
1 Connect the AC power cable to:
• the wall socket.
»This product is ready to be set up for use.
4 Get started
Prepare the remote control
1Press and push the battery compartment to slide it open (see “1” in the illustration).
2Insert two AAA batteries with correct polarity
3Push and slide back the battery compartment (see “3” in the illustration).
Note
•If you are not going to use the remote control for a long time, remove the batteries.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Find the TV input channel
1Press 
to turn on this product.
2Turn on the TV and switch to the video input channel (refer to the TV user manual on how to select the A/V input channel).
Select menu display language
Note
•If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the language set on TV is supported by this product).
8EN
