Philips DVP5500S/03 Connections, Connecting the power cord, Using an accessory RF modulator

Connections
E				Connecting the power cord
nglish
RF coaxial cable to TV
2
	Back of RF Modulator
			(example only)
INT IN	TO TV VIDEO	AUDIO IN
	IN	R	L
			CH3	CH4
Antenna or
Cable TV signal			1

IMPORTANT!

–If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

1Use the composite video cable (yellow) to connect the DVD Player’s VIDEO OUT jack to the video input jack on the RF modulator.

2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connections with the power switched on.

When no disc is loaded, press

STANDBY ON on the DVD Player front panel,

“NO DISC” may appear on the display panel.

NO DISC

10

01-43 DVP5505S_03_RC2 10 10/05/05, 10:04 AM