Sound and Volume Controls

E n g l i s h

Setting the speakers’ channels

You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.

IMPORTANT!

The speaker settings only available on Multi-channel audio outputs. You can also press SURROUND button on the remote to select Multi-channel.

1Press STOP then, press SYSTEM MENU.

2Press 2 repeatedly to select {AUDIO SETUP PAGE}.

3Press 34to highlight {SPEAKER SETUP}, then press 2.

{SUBWOOFER}

ON – when a subwoofer is connected. OFF – when no subwoofer is connected.

{SPEAKER VOLUME} – Volume level setting for individual speakers (-6dB ~ +6dB).

- - Speakers Volume Setup - -

 

Front Left

0dB0

 

 

 

0dB0

Front Right

 

 

 

 

 

0dB0

Center

 

 

 

 

 

0dB0

Subwoofer

 

 

 

 

 

0dB0

Rear Right

 

 

 

0dB0

Rear Left

 

 

{SPEAKER DELAY} – Delay times setting in relation to the listening position/ distance for centre and surround speakers (1m ~ 10m).

- - Audio Setup Page - -

Analog Output

Digital Audio Setup

Sound Mode

Speaker Setup

CD Upsampling

Night Mode

- - Speaker Setup Page - -

Front Speakers

Large

Center Speaker

Small

Rear Speakers

 

Subwoofer

 

Speakers Volume

 

Speakers Delay

 

 

 

4Enter its submenu by pressing 2.

5Press 34 to highlight one of the options below at a time, then press 2.

{FRONT SPEAKERS, CENTER SPEAKER, REAR SPEAKERS}

OFF – when no speaker is connected. LARGE – when connected speakers can produce low frequency signals below 120Hz.

SMALL – when connected speakers cannot produce low frequency signals below 120Hz.

- - Speakers Distance Setup - -

 

Center

1.0M

 

 

1.0M

Subwoofer

 

 

1.0M

Rear Right

 

 

1.0M

Rear Left

 

6Press 1 2 to adjust the setting that best suit your surround sound needs.

7Press OK to confirm.

Helpful Hints:

Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

The test tone will be automatically generated to help you judge the sound level of each speaker.

TIPS: To return to the previous menu, press 1.

To remove the menu, press SYSTEM MENU.

36

01-43 DVP5505S_03_RC2

36

10/05/05, 10:05 AM

Page 36
Image 36
Philips DVP5500S/03 user manual Sound and Volume Controls, Setting the speakers’ channels