Philips DVP5982 Cannot be read, Slow operation of the USB flash, Drive, No Hdmi video output

English

Troubleshooting (continued)

Problem		Solution
The contents of the USB flash drive	–	The USB flash drive format is not compatible with the
cannot be read		DVD player.
	– Drive is formatted with a different file system. (e.g.
		NTFS)
Slow operation of the USB flash	–	Big file size or high solution USB flash driver takes longer
drive		time to read and display on the TV screen.
No HDMI video output	–	HDMI connection can only be made to HDMI-equipped
		devices with HDCP (High Bandwidth Digital Content
		Protection). Use a separate adaptor (DVI to HDMI) for
		DVI TV connection (equipped with HDCP).
	– Make sure the resolution of this DVD player matches the
		TV device you have connected using the HDMI;
		480p/576p/720p/1080i/1080p and this DVD player
		supports 1080p at 50/60Hz only.
	– When connecting to a non-HDCP complaint TV, the
		HDCP warning message will appear.
	– When the HDMI and RGB video connection are used at
		the same time, there will be no picture output from the
		RGB video connection, disconnect the HDMI cable.
	– Press HD UPSCALE if no picture on the TV screen after
		power off and on.
	– Check the connection between the TV and HDMI of
		DVD player.
	– During resolution selection for DVI TV, a distorted or
		black screen may appear, see HDMI Video Setup.
No HDMI audio output	–	There will be no sound from the HDMI output if the
		source device is only DVI/HDCP (High Bandwidth Digital
		Content Protection)- compatible.
	–	It is not possible to output SACD or copy-controlled
		DVD audio sources from the HDMI connection.

54

01-57_dvp5982_37_eng3.indd 54 2007-06-13 2:13:07 PM