2 Set up
AFinding the viewing channel
APress 1 on this unit to turn it on.
BTurn on the TV. Use the TVs remote control to select the correct viewing channel.
Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. If you are using a RF modulator, set the TV to channel 3 or 4.
BSelect the display language on the screen
APress SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock |
|
OSD Language | Auto (ENG) |
Sleep | ENGLISH |
Lip Sync | FRANÇAIS |
Volume | ESPAÑOL |
Auto Standby |
|
DivX(R) VOD Code |
|
|
|
|
|
BUse keys to select { OSD Language } and press
.
CUse keys to select a language and press OK to confirm. (For Philips ‘EasyLink’ TV, { Auto } must be selected.)
DPress SETUP to exit.
Note The language set here is only for the menus that are shown on the TV while operating this unit, not for the DVD disc menu.
There are various setup options (Audio Setup, Video Setup, Preference) available on this unit. Refer to the user manual for more information.
Need help?
User Manual
See the user manual that came with your Philips DVD Player.
Online
Register your product and get support at www.philips.com/welcome.
Hotline
Call
3 Enjoy
AStart disc playback
APlayback may start automatically when a disc has been loaded in the disc tray.
Note If a disc menu appears on the TV, use keys to navigate in the DVD menu.
B Press u to start playback.
C To stop playback, press n.
Troubleshooting
For more troubleshooting tips, see the user manual.
No power
•Check if the AC power cord is properly connected.
•Press 1 on the top panel of this unit to turn on the power.
No picture
•Check connection to TV and ensure the plugs are firmly in place.
No sound or distorted sound
•Check audio connections and make sure that the connected audio device is turned on.
•For HDMI connection, check if your TVs HDMI or Digital setting is set to ON. Contact your TV manufacturer for detailed information.
Remote control does not work
•Check the batteries are loaded correctly or replace the batteries with new ones.
•Reduce the distance between the remote control and this unit.
•Point the remote control directly toward the IR sensor.
2008 C Philips Consumer Electronics
A Division of Philips Electronics North America Corp P.O. Box 671539 Marietta, GA
All rights reserved.
Printed in China
dvp5990_5992_37_qsg_eng.indd 2 |
