D-Link DCS-7513 user manual Event Setup, MediaServer

Section 3: Configuration

Event Setup

In a typical application, when motion is detected, the DCS‑7513 sends images to a FTP server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a specified action will be performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP site.

Event Condition Action

ex.

Motion detection, Periodically, Digital input, System reboot

MediaServer

(what to send)	(where to send)
ex.	ex.
Snapshot, Video Clips	Email, FTP

To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated.

D-Link DCS-7513 User Manual 49