D-Link DCS-7513 user manual Deploying the Camera

Section 2: Assembly and Installation

Deploying the Camera

Note: Before deploying the camera to a fixed location, it is recommended that you take a photo from the desired location to ensure an adequate field-of-view.

Step 1

Position the Alignment Sticker in the desired location making sure the Camera and Wire-in-Bracket have sufficient space. Use the dimension diagrams in "Dimensions" on page 71 for additional reference.

Step 2

1

Use a 6mm drill bit to make required holes approximately 30mm deep.

Step 3

Remove the Alignment Sticker.

Step 4

Insert wall anchors and affix the mounting plate using the screws provided.

4

D-Link DCS-7513 User Manual 17