Turn on the TV, then press STANDBY-ON 2 to turn on

LABEL

Make sure your DVD Player and

TV are connected and turned on!

1	Turn on the TV, then press STANDBY-ON 2 to turn on the
	DVD Player.
2	Select the correct Video In mode at your TV.
	You should see the blue Philips DVD background screen on the TV (if no disc
	is in the DVD Player).
3	Press OPEN/CLOSE 0 on the front of the DVD Player and
	load a disc. Press OPEN•CLOSE 0 again to close the disc
	tray.
	Make sure the disc label is facing up. For double-sided discs, the label of the
	side to play should face up.
4	Playback will start automatically.
	If a disc menu appears, use 3 4 1 2 on the remote to make a selection, then

press OK to confirm. Or, use the numeric keypad on the remote to select numbered features. Follow the instructions given in the disc menu.

PREVIEW MUTE

5 To stop playback, press STOP 9.

*Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO.

*Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

*Or, your TV remote control may have a button or switch that chooses different video modes.

*Do not use channel 3 or 4 on the TV unless you are using an RF modulator.

*See your TV manual for more details.

Region Codes

DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD Player.

ALL 1

Detailed playback features and additional functions are described in the accompanying owner’s manual.