Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Analogue Output This setting is only required if you have connected the audio output of this unit to a stereo device or TV using the analogue output socket.

{ LT/RT }

– The connected device has a built-in

 

Dolby Pro Logic decoder. It can deliver

 

the surround sound through the two

{ Stereo }

speakers.

– The connected device can only output

{ V SURR }

stereo audio through two speakers.

– For virtual surround sound effects.

Digital Audio Setup This setting is only required if you have connected the audio output of this unit to an amplifier/receiver using the digital output socket.

{ Digital Output } – { Off }

Disable digital audio output. Select this if you are using the analogue audio sockets to connect this unit to a TV or Stereo system.

{ All }

The connected device supports multi- channel audio formats. The digital audio format will be output as on disc.

{ PCM Only }

The connected device does not support multi-channel formats. All audio signals are downmixed to PCM format (2-channel).

35

English

1dvp6620_eu_eng.indd 35

2008-08-06 2:21:24 PM

Page 35
Image 35
Philips DVP6620/12 manual Lt/Rt, Stereo, Surr, Digital Output Off, PCM Only