Connections
Connecting the power cord
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
INT IN | TO TV VIDEO | AUDIO IN | |
| IN | R | L |
English
Antenna or
Cable TV signal
CH3 CH4
|
| COMPONENT |
| VIDEO IN | |
AUDIO | IN | V (Pr/Cr) |
OUT |
|
|
|
| ~ AC MAINS |
|
| U (Pb/Cb) |
| VIDEO IN | |
|
| Y |
1
DIGITAL AUDIO OUT | CVBS | Y |
PCM/MPEG2/Dolby Digital |
|
|
DIGITAL AUDIO OUT | CVBS | Y |
PCM/MPEG2/Dolby Digital |
|
|
L
R | COAXIAL OPTICAL |
COAXIAL OPTICAL | Pr | Pb |
| Pr | Pb | |
TV OUT | STER |
|
|
IMPORTANT!
–If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to the video input jack on the RF modulator.
2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.
After everything is connected properly, plug in the AC power cord to the power outlet.
Never make or change any connections with the power switched on.
●If a disc is loaded, press STANDBY ON on the DVD Player front panel,
➜“DISC” appears on the display panel.
●If a memory card is inserted, press STANDBY ON on the DVD Player front panel,
➜“SLOT1” or “SLOT2” appears on the display panel.
●If there is neither a disc nor memory card inserted,
➜“NO DISC” appears on the DVD Player display panel.
11
