Getting Started
English
To deactivate Progressive manually - cont’d
If the progressive function is activated, but your TV does not support progressive function or YPbPr cable is not connected accordingly, there will be a blank screen. You can deactivated progressive function as below:
1Press STANDBY ON on the front panel to switch on the DVD player.
2Press OPEN/CLOSE on the front panel to open the disc tray.
3Press 1 then, press MUTE on the remote control.
➜ You should see the Philips DVD background screen on the TV.
Selecting the colour system that corresponds to your TV
This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.
- - VIDEO SETUP PAGE - -
TV TYPE | PAL |
TV DISPLAY | NTSC |
PROGRESSIVE | MULTI |
PICTURE SETTING |
|
BLACK LEVEL |
|
COMPONENT |
|
|
|
|
|
4Press 34 to highlight one of the options below:
PAL – Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output in NTSC format.
Multi – Select this if the connected TV is compatible with both NTSC and PAL
5Select an item and press OK.
Helpful Hints:
ÐBefore changing the current TV Standard setting, ensure that your TV supports the Ôselected TV TypeÕ system.
ÐIf there is no proper picture on your TV, wait for 15 seconds for auto recovery.
CHANGING PAL TO NTSC
1.ENSURE THAT YOUR TV SYSTEM SUPPORTS NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER.
OK |
| Cancel |
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
OK |
| Cancel |
1Press SYSTEM MENU.
2Press 2 repeatedly to select {VIDEO SETUP PAGE}.
3Press 34 to highlight {TV TYPE}, then press 2.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
16
