Philips DVP 3055V 6, 9

English

Operation with tape

Timer recording using On Screen

Display

You may set up to seven timer record events within one

month of the current date.

Note

Before setting the timer make sure that you have set the

DVD+VCR clock correctly and you know which PR

numbers have been assigned to the TV stations you have

tuned on your DVD+VCR.

Timer Recording function will only active if the

DVD+VCR is in Standby mode.

1Insert a video cassette with protection tab into your

DVD+VCR.

The video cassette should have the window side facing

up and the arrow facing away from you.

2Ensure that the set is in VCR mode.

3Press SYSTEM MENU.

Press 1or 2to select REC.

Press OK.

4Press OK to start setting the timer record event.

If all timer record events are full press 3or 4to select

the event that you wish to remove and replace.

Press 1to delete the event.

5Press 3or 4to enter the station that you wish to

record.

Once selected press 2.

You may also press 3or 4.

If you wish to record from AUDIO IN (L/R) and VIDEO

IN on the front or from the EURO SCART sockets on

the back of your unit,See Notes (AV1,AV2 or AV3).

6Press 3or 4to enter the date of the programme.

If you press OKbefore entering the date you may select

one of the following automated recording features.Use

1or 2to select,then press OK to confirm.

DLYTo record every day (except Saturday and Sunday)

at the same time.

SU ~ SATo record at the same time every week.

7Press 3or 4to enter the recording start and end

times of the programme that you wish to record.

Please note your DVD+VCR uses a 24 hour clock.e.g.

1pm will be displayed as 13:00.

You may also select the start and end times by using 3

or 4.

8Press 3or 4to switch VPS/PDC on or off.

Press 2to select the recording speed.

Press 3or 4to select the desired tape speed

(SP,IP,or LP).

IP mode determines how much tape is left and switches

speed from SP to LP,if necessary,to complete recording

the program.IP mode cannot be selected when

VPS/PDC is ON.

Press SYSTEM MENU to set another timer record

event and follow steps 4 to 8.

9Check that the timer event details are correct.

Press SYSTEM MENU twice.

If PLEASE CHECK is displayed,you have entered

incorrect and will need to re-enter the data.

Press 11to switch your DVD+VCR Standby mode.

will appear in the display window while your

DVD+VCR waits to make the recording.

To watch a DVD during timer recording standby mode,

press POWER and DVD to switch to DVD mode.

Press STOPto end recording.

Notes

●You can obtain the PR number assigned to each station by

pressing DISPLAY when you are watching the respective

channel.

●If at a later date you wish to delete or change any of

the settings in timer event memory you may do so

without having to enter all the timer event information

again.Simply display the timer event screen. Use 3or 4

to select the event that you wish to deleteor change.

Press 1to delete the event...or

Press OK to change;then press 1or 2to select; Station,

Date,Start and End times and LP. Press 3or 4to enter

the correct information.

●If Timer record events Overlap...

Make sure that the preset times of the timer recording

events do not overlap.If they do, the earlier programme

will always be given priority.

Example:

Programme 1 is programmed to start at 16:00 and end at

17:00.

Programme 2 is programmed to start at 16:30 and end at

17:30.

(In this case,Programme 1 will be recorded in its entirety,

but only the last 30 minutes of Programme 2 will be

recorded.)

PR DATE T I M E

- - - -

- -

- - - - SP

- -

- - - - - - - -~::