In-car connections (supplied or optionally available)
Use only the AY3545 or AY 3548 car voltage converter (4.5 V DC,positive
pole to the centre pin) and the AY3501 car adapter cassette.Any other
product may damage the set.
1Put the set on a horizontal,vibration-free and
stable surface.Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2Plug the voltage converter into the cigarette
lighter socket (only for a 12 V car battery,
negative grounding),then connect the
wired end with the 4.5V DC input socket on
the set.
3If necessary,clean the cigarette lighter socket to obtain a good electrical
contact.
4Turn down the volume and connect the adapter cassette plug to
LINEOUT/ pon the set.
5Carefully insert the adapter cassette into the car radio’s cassette
compartment.
6Make sure the cord does not hinder your driving.
7Set VOL Eon the set to position 8.Star t playback on the set and adjust
the sound with the car radio controls.
Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
Note:If your car radio has a LINE IN socket, it is better to connect the set to
this socket instead of using the adapter cassette.Connect LINE OUT/pof the
set with the LINE INsocket of your car radio with an appropriate cable.
23
Accessories
English
LINE OUT
/
PROGRAM
OFF
•RE
SUME
•HOLD
L
INEO
UT/
OPE
N
VO
L.
MODE
ESP
DBB
DISPLAY
ALBUM • TITLESEARCH
ALBUM • TITLE
SEARCH
4.5V DC
12 V