FEATURES
16
You can select up to 30 tracks and store them in the
memory in a desired sequence. You can store any track
more than once.
1While playback is stopped, select a track with 5or
6.
2Press PROGRAM to store the track.
yPROGRAMlights up, the track number
programmed and Pwith the total number of
stored tracks are displayed.
3Select and store all desired tracks in this way.
4Press 2to start playback of your selected tracks.
yPROGRAMis shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
yThe display shows all stored tracks in sequence.
Notes:– If you press PROGRAM and there is no track selected,
SELECt
is
displayed.
– If you try to store more than 30 tracks,
FULL
is displayed.
Erasing the program
1If necessary, press 9to stop playback.
2Press 9to erase the program.
yCLEAris displayed once, PROGRAM goes off
and the program is erased.
Notes:The program will also be erased if you
– interrupt the power supply,
– open the CD lid, or
– the set is switched off automatically.
PROGRAM
PROGRAM
PROGRAM
PROGRAM
Programming track numbers
English
EXP101/17 eng 28/11/00 8:56 Page 16