POWER SUPPLY/LINE OUT
9
Only use the AY 3170 power adapter
(4.5 V/300mA direct current, positive pole to the
center pin). Any other product may damage the set.
1Make sure the local voltage corresponds to the
adapter’s voltage.
2Connect the power adapter to the 4.5V DC jack
of the player and to the wall outlet.
Note: Always disconnect the adapter when you are not using it.
You can connect the CD player to an additional
appliance, E.g. amplifier, radio cassette recorder, etc.,
with a LINE IN jack.
1Turn down the volume on the additional appliance.
2Connect an audio signal cable (not supplied,) to the
LINE OUT jack of the CD player and the CD IN, AUX
IN or LINE IN jack of the additional appliance.
3To adjust the sound and volume, use the controls on
the connected appliance.
Line out
MODE
CD REWRITABLE COMPATIBLE
MAGIC ELECTRONIC SKIP PROTECTION
Power adapter (supplied or optionally available)
English
0
EXP101/17 eng 28/11/00 8:56 Page 9