Philips EXP 301/11 manual Accessories, In-car connections supplied or optionally available

English

Accessories

In-car connections (supplied or optionally available)

Only use the AY 3545 car voltage converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car adapter cassette. Any other product may damage the set.

1Put the set on a horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the set is neither a danger nor an obstacle to the driver and the passengers.

2Connect the DC plug of the voltage converter to 4.5V DC on the set (only for a 12 V car battery, negative grounding).

4.5 V DC

O

F

F

• R E S U M

E • HOLD

L

3Insert the voltage converter into the cigarette

lighter socket. If necessary, clean the cigarette lighter socket to obtain a good electrical contact.

4Turn down the volume and connect the adapter cassette plug to LINE OUT/p on the set.

5Carefully insert the adapter cassette into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Set VOL E on the set to position 8. Start playback on the set and adjust the sound with the car radio controls.

Always remove the voltage converter from the cigarette lighter socket when the set is not in use.

Note: If your car radio has a LINE IN socket, it is better to use it for the

car radio connection instead of the adapter cassette. Connect the signal lead to this LINE IN socket and to LINE OUT/p on the set.

24