Menu Item Menu Functions
Display “[11] ring 0”
Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the stored ring tones.
11There are 3 available
Press MENU to select and exit.
Display “
Factory Reset:
|
|
| 1. Key in the physical / MAC address on back of the phone. | |
| Factory Reset | |||
|
| 2. Press MENU to reset phone to FACTORY DEFAULT settings. All your setting will | ||
|
|
| ||
|
|
| be erased. | |
|
|
| Manual Reboot: Press MENU without keying anything. | |
|
|
|
|
|
|
|
|
|
|
|
|
| When phone is powered on and time is displayed |
|
| Others |
| Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear and adjust the ring tone |
|
|
| volume, from 0 (off) to 7 (maximum), off and on hook to set |
| |
|
|
| Press SPEAKERPHONE button, or off hook and pick up handset, press ‘↓’ or ’↑’ to adjust the |
|
|
|
| speakerphone/headset or handset volume. |
|
|
|
|
|
|
CONFIGURATION WITH WEB BROWSER
The BT200 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the IP phone through any web browser.
Access the Web Configuration Menu
The IP Phone Web Configuration Menu can be accessed by the following URI:
NOTE: When typing the IP address into a browser, strip out the leading “0” as the browser will parse in
octet. e.g. if the IP address is: 192.168.001.014, please type in: 192.168.1.14.
Grandstream Networks, Inc. | BT200 User Manual | Page 18 of 37 |
| Firmware 1.1.1.14 | Last Updated: 12/2006 |
