MAKING AND ANSWERING PHONE CALLS
HANDSET, SPEAKERPHONE AND HEADSET MODE
The BT200 handset can be toggled between speaker mode
PLACING A TRADITIONAL PHONE CALL
There are four ways to place a call:
1.Use handset, headset or press SPEAKERPHONE button and dial.
2.Press the SEND button directly to redial last number. Last dialed number will be displayed on the LCD as the number is dialed.
3.Browse the CALLED/CALLER history, select the number using the navigation keys and press SEND button to place the call.
4.Use the menu key to browse the “CALLED/CALLERS” menu to scroll through the last 10 numbers dialed or received. Select number using the navigation keys and press SEND button to place the call.
Examples:
•To dial another extension on the same proxy, such as 1008, pick up handset or press speaker, dial 1008 and then press SEND.
•To dial an outside number such as
PLACING CALLS USING AN IP ADDRESS
Direct IP calling allows two parties using a BT200 and another VoIP device to talk with each other in an ad hoc fashion without a SIP proxy. VoIP calls can be made between two phones if:
•both phone/VoIP device have public IP addresses, or
•both phone/VoIP device are on a same LAN/VPN using private or public IP addresses, or
•both phone/VoIP device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ)
PLACING A DIRECT IP-IP CALL
To place a direct IP to IP call, first
Examples:
• If the target IP address is 192.168.0.10, the dialing convention is MENU 192 168 000 010 followed by pressing the “SEND” key or wait for seconds in the No Key Entry Timeout.
•If the target IP address/port is 192.168.1.20:5062, then the dialing convention is MENU_key 192168001020*45062 followed by the SEND key or wait for 4 seconds.
Grandstream Networks, Inc. | BT200 User Manual | Page 12 of 37 |
| Firmware 1.1.1.14 | Last Updated: 12/2006 |
