DTMF Payload Type
Syslog Server
Syslog Level
NTP server
Allow DHCP Option 42 to override NTP server
Distinctive Ring Tone
Disable Call Waiting
This parameter sets the payload type for DTMF using RFC2833.
The IP address or URL of System log server. This feature is especially useful for ITSP (Internet Telephone Service Provider).
Select the BT200 to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events:
1.product model/version on boot up (INFO level)
2.NAT related info (INFO level)
3.sent or received SIP message (DEBUG level)
4.SIP message summary (INFO level)
5.inbound and outbound calls (INFO level)
6.registration status change (INFO level)
7.negotiated codec (INFO level)
8.Ethernet link up (INFO level)
9.SLIC chip exception (WARNING and ERROR levels)
10.memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following components:
GS_LOG: [device MAC address][error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet link is up
URI or IP address of the NTP (Network Time Protocol) server, which will be used by the phone to synchronize the date and time.
DHCP Option 42 specifies a list of IP addresses for Network Time Protocol (NTP) servers available to the client. If you choose yes, BT200 will use the NTP servers resolved from DHCP, instead of the one you specified in the "NTP Server" option above.
Customer Ring Tone 1 to 3 with associate Caller ID: when selected, if Caller ID is configured, then the device will ONLY sound this ring tone when the incoming call is from the Caller ID, device will use System Ring Tone for all other calls.
When selected but no Caller ID is configured, the selected ring tone will be used for all incoming calls.
Default is No.
Grandstream Networks, Inc. | BT200 User Manual | Page 25 of 37 |
| Firmware 1.1.1.14 | Last Updated: 12/2006 |
