PLAYBACK, RECORDING
18
1Press POWER / STANDBY to switch on the receiver.
2Turn SOURCESELECTOR to select a source.
yThe name of the source is displayed.
•You can select the FRONT AV / GAMEinput by pressing
FRONT AV (FR 970 only).
3Start playback of the source as usual.
•Turn VOLUMEto adjust the volume.
yVOLUME and the volume level between 0and 50 is
displayed.
1Press BASS or TREBLE.
yBASS or TREBLE and the actual value are displayed
briefly. Then TURN VOLUME KNOB TO CHANGE is
scrolled.
2Turn VOLUME to adjust the bass or treble.
yBASS or TREBLE and the actual value are displayed.
Note : If VOLUME is not turned within 5 seconds or if any
other control is used, the bass or treble adjustment is
switched off.
•Press ±SOUND on the remote control to scroll through
the built-in smart sounds: MOVIE, SPEECH, MUSIC,
MULTIMEDIA and PERSONAL. (PERSONAL is the
userdefined bass and treble setting.)
ySMART SOUND is displayed and the name of the chosen
sound profile is scrolled once if smart sound is on.
•Press LOUDNESS to switch loudness either on or off.
yLOUDNESS is displayed if loudness is on.
If you wish to record from a source you must select it with
SOURCE SELECTOR. The incoming signal is reproduced by all
audio and – if the source includes a video signal – video
outputs of the receiver. The sound settings do not affect the
recording.
1Turn SOURCESELECTOR (or press FRONT AV – FR 970 only)
to select the source you want to record from.
yThe name of the source is displayed.
2Prepare the desired recording appliance. It must be
connected to one of the outputs of the receiver.
3Start recording on the recording appliance.
4Start the playback of the source as usual.
Notes: – The audio and video signal of VCR IN is not
reproduced by VCR OUT. The same applies to the
audio signal of CDR/TAPE IN to CDR/TAPE OUT.
– We recommend not to use the digital output
COAX OUT of the receiver to record from an
analogue source. Use the analogue output
CDR/TAPE instead.
It is possible to connect a digital recorder to the digital output of
the receiver. In this way, all signals coming from the digital
inputs can be recorded directly on the connected audio recorder.
The receiver will also convert all signals coming from the
analogue inputs to the digital output.
The receiver can be used to record digitally a multichannel
surround sound audio signal (Dolby Digital or MPEG) from, for
example, DVD to CD-R. The receiver will convert the digital
multichannel signal into a stereo signal without loss of relevant
sound information.
Notes: – Do not use the 3D SURROUND feature while making
digital recordings as this will distort the digital
audio signal.
– When recording a Dolby Digital or MPEG signal, each
track must be recorded individually.
Recording from the digital output
Recording from a source
Adjusting the sound
Playing a source
English