Tape Operation / Recording
Playing tapes
To playback a selected tape deck
1Press TAPE (or TAPE 1/2 on the remote control) repeatedly to select tape deck 1 or 2.
2PressÉÅ.
To stop playback
●Press Ç.
To select automatic replay or one time playback
●Press AUTO REPLAY repeatedly to select the different playback modes.
➜"AUTO REPLAY" ( 
) or "ONCE" ( ) is displayed.
AUTO REPLAY …the tape will rewind automatically at the end of playback and replay again. It will replay up to a maximum of 20 times.
ONCE .............. the tape will playback the
selected side once and then stop.
Rewinding / Fast forwarding
1Stop playback, press à or á.
➜ The tape will stop automatically at the end of rewinding or fast forwarding.
2Press Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it is also possible to select another source (CD or TUNER, for example).
General information on recording
●If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source.
●For recording, use only tape of IEC type I (normal tape).
●The recording level is set automatically, regardless of the position of the Volume, DBB, DSC and so forth.
●The tape is secured at both ends with leader
tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.
●To prevent accidental recording,
break out the tab on the left shoulder of the tape side you want to protect.
●If “CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.
IMPORTANT!
–Recording is permissible if copyright or other rights of third parties are not infringed upon.
–Recording is possible only on tape deck 2.
E n g l i s h
21
pg | 21 | 3139 115 21381 |
12/24/01, 11:17 AM |
