Tape Operation / Recording

E n g l i s h

Preparation for recording

1Press TAPE to select TAPE 2.

2Load a recordable tape into tape deck 2 with full spool to the left.

3Prepare the source to be recorded. CD – load the disc(s).

TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left.

AUX – connect external equipment.

When recording is in progress

REC starts flashing.

It is not possible to listen to another source, except tape dubbing.

It is not possible to activate the timer function during recording or tape dubbing.

One touch recording / Recording the mixed sound (not available for all

versions)

1Press CD 1/2/3, TUNER or AUX to select the source.

You can connect a microphone to record the mixed sound (refer to “Karaoke - Microphone Mixing”).

2Start playback of the selected source.

3Press RECORD to start recording.

To stop recording

Press Ç on the system.

Note:

– One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" will be displayed.

CD Synchronised start recording

1Press CD 1/2/3 to select the disc.

Press í or ë to select the desired track to start recording.

You can programme the tracks in the order you want them to be recorded (refer to “CD Operation - Programming the disc tracks”).

2Press RECORD to start recording.

The disc will start playback automatically.

To select another track during recording

1PressÉÅto interrupt recording.

2Pressí or ë to select the desired track.

3PressÉÅto resume recording.

To stop recording

Press Ç.

Recording and disc playback will stop simultaneously.

Dubbing tapes

1Press TAPE to select tape mode.

2Load the prerecorded tape in tape deck 1.

You can set the tape to the desired passage where recording will start.

3Press RECORD.

Playing and recording will start simultaneously.

"DUB" is displayed.

Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure.

To stop dubbing

Press Ç. Notes:

Dubbing of tapes is possible only from tape deck 1 to tape deck 2.

To ensure good dubbing, use tapes of the same length.

22

pg 001-029/C355/21-Eng

22

3139 115 21381

12/24/01, 11:17 AM

Page 22
Image 22
Philips FW-C355 manual Preparation for recording, CD Synchronised start recording, Dubbing tapes