Selecting the Equalizer
Display
You can select the desired equalizer display for the system. You must not press the DSC button on the system before using the JOG.
•Rotate the JOG to select the desired Equalizer Display, NORMAL, TOP DOWN, or NITE MODE.
ª The selected display will be shown.
NORMAL Display
PROGRAM SHUFFLE |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
TOP DOWN Display
PROGRAM SHUFFLE |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
NITE MODE Display
PROGRAM SHUFFLE |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
Note:
–In NITE MODE, all lights will be switched off and the display brightness will be dimmed.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the system to suit your type of music.
•Press DIGITAL SOUND CONTROL (DSC) to select OPTIMAL, CLASSIC, TECHNO, JAZZ , ROCK or VOCAL.
ªThe selected digital sound is encircled.
ª“OPTIMAL X, CLASSIC, TECHNO X, JAZZ X, ROCK X or VOCAL X” will be displayed. "X" is the
You can change the digital sound setting level for all but CLASSIC with the JOG.
•First select the DSC feature, then rotate the JOG until the desired digital sound setting level is reached.
ªThe digital sound setting level will increase or decrease between level 1 and 5.
Note:
–For neutral setting, select CLASSIC and switch off DBB.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to enhance the bass response.
•Press DBB briefly to select a bass boost level.
ªThe respective DBB level is being encircled and lit.
ª“BEAT, PUNCH or BLAST” will be displayed.
To switch off DBB
•Press DBB briefly until “DBB OFF” is displayed.
Note:
–Some CDs or tapes might be recorded in high modulation. It may cause a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
OPERATING THE SYSTEM
Automatic
English
15