English
CD RECORDER
–When an artist’s name has been stored for a certain track, the name will automatically be copied for the next track. The name can be confirmed by pressing STORE/MENU or a new name can be entered as described above.
Erasing names
1Select the TEXT ERASE submenu.
ª"TEXT ERASE" appears on the display.
2Press ENTER to confirm.
3Rotate EASY JOG to select the required option in the submenu: ALL TEXT, ALBUM TITLE, ALBUM ARTIST, TRACK 1 TITLE, TRACK 1 ARTIST, etc.
4Press ENTER to confirm.
ªThe display will ask you to reconfirm your selection, press ENTER again to reconfirm.
5Press STORE/MENU to return to the submenu or STOP ‚to exit.
Text Memory Review/Erase Text Memory
1Select the MEMORY VIEW submenu.
ª"MEMORY VIEW" appears on the display.
2Press ENTER to confirm.
3Select the disc you wish to erase and press ENTER to confirm.
ª"ERASE MEMORY" appears on the display.
4Press ENTER to erase.
5Press ENTER again to reconfirm the erasure of the text for that particular disc.
6Press STORE/MENU to return to the submenu or STOP ‚to exit.
Notes:
–If there are no discs in the memory, the message MEMORY EMPTY appears on the display.
–When the text memory of your CD Recorder is full, the message MEMORY FULL will appear, followed by FINALIZE CD. If you want to add a CD to the list of discs for which text is stored, you have to erase a disc from this list or finalize another disc. (“for which text is stored”)
–MEMORY FULL/FINALIZE CD may also appear when unfinalizing a CDRW disc for which text was stored (see ‘Unfinalizing CDRW discs’). The same action(s) should be taken in order to obtain memory space.
RECORDING SETTINGS
Auto track increment
1Select the AUTO TRACKING sub menu.
ª"AUTO TRACK" appears on the display.
2Press ENTER to confirm.
3Select Auto track ON or OFF and press ENTER to confirm.
ª"ON" or "OFF" appears for 2 seconds on the display.
•When ON is selected, track numbers will be automatically incremented during recording.
•When OFF is selected, you can number the recorded tracks yourself.
4Press STORE/MENU to store settings and return to the submenu or STOP ‚ to exit.
BALANCE (Only active in Record/Standby mode)
1Select the SET BALANCE submenu.
ª"SET BALANCE" appears on the display.
2Press ENTER to confirm.
ªFE and
3Adjust recording balance by rotating the
EASY JOG button.
•Turn left: the figure left (F) counts up, right counts down.
•Turn right: the figure right (E) counts up, left counts down.
4Press ENTER to confirm.
5Press STORE/MENU to store settings.
Note:
– The balance setting will not be stored.
22
